Heat Transfer Solutions

Extran’s extensive portfolio of equipment supplied to the Heat Transfer Industry and access to global partners, gives it the ability to source and supply product spares used in all aspects of our industry.

These product spares include the following,

  • Plain Tube
  • Low Fin Tube
  • High Fin Tube
  • Fin Blocks
  • Tube Internals
  • Tube Plugging equipment
  • Fans assemblies, Hubs & Blades
  • Fan Shafts
  • Bearings
  • Pulley Drives and Belts
  • Plugs and Washers
  • PHE Plates & Gaskets
  • Oil Cooler Bundles and O-Rings

Tube can be supplied in all materials from Carbon Steel, Stainless Steel, Duplex, Nickel Alloy, Copper, Brass, Bronze Alloys, Aluminium, right up to the higher grades of Titanium.

Mono-metal finned tube can be supplied in the low and high fin configuration from any of the materials listed above.

By-metal finned tube can be fabricated using any base tube material needed for the application, with fins being either tension wrapped (“L” and “LL” fin), embedded (“G” fin), extruded (“E” fin), high frequency welded and fixed using a soldered or galvanising method.

Another form of tube available is the square or rectangular finned tube, with the base tube supplied in a round or oval shape.

Fan spares can be provided for fans from 200mm diameter right up to 12,000mm diameter, consisting of full Fan Assemblies, Fan Blades, Fan Hubs, Tip Seals and Hub Air Seals.

Other Air Cooled Heat Exchanger spares include Fan Shafts, Bearings, Pulleys, Belts, Header Box Plugs & Gaskets, Inlet Bells and Vibration Switches.

Plate Heat Exchanger spars, such as Plates and Gaskets can to supplied for most major brands, in both Stainless Steel and Titanium.

If you have any enquiries or need more information please Contact Extran.

Extran Pty. Ltd 10 Gabrielle Court, Bayswater North, Victoria, Australia 3153